Solenoid (Relay) For HP LaserJet P1007 P1008 MF3010

• SKU                                              EPPA002
• Category                                       Printer Accessories
• HSN Code                                     8443
• Unit                                                Nos.
• Dimensions                                   3 cm x 2 cm x 1 cm
• Weight                                           125 g
• MPN                                               RM1-4619-000
• Brand                                              HP
• Parts Type                                      compatible
• Model                                             LaserJet P1007
• Tax Preference                               Taxable

Replacement Steps of Solenoid (Relay) For HP LaserJet P1007 P1008 MF3010 :-

1. Power Off the Printer

   • Turn off the printer and unplug it from the electrical outlet for safety.

2. Open the Printer Cover

   • Open the front cover to access the toner cartridge and internal components.

3. Remove the Toner Cartridge

   • Carefully pull out the toner cartridge and set it aside on a clean surface.

4. Access the Printer Internals

   • Depending on the model, you may need to remove the back cover or side panels. Use a screwdriver to remove any screws necessary for access.

5. Locate the Solenoid (Relay)

   • Identify the solenoid within the printer. It’s typically located near the fuser unit or paper feed mechanism.

6. Disconnect the Wiring

   • Carefully unplug any wires or connectors attached to the solenoid. Take note of where each connector goes for reassembly.

7. Remove the Old Solenoid

   • If the solenoid is secured with screws, use a screwdriver to remove them. Carefully pull the solenoid out of its housing.

8. Install the New Solenoid

   • Take the new solenoid and position it in the same location as the old one. Secure it with screws if applicable.

9. Reconnect the Wiring

   • Plug in any connectors that were disconnected earlier, ensuring they are secure.

10. Reassemble the Printer

    • Replace any side or back panels that were removed and secure them with screws.

11. Reinstall the Toner Cartridge

    • Carefully insert the toner cartridge back into the printer, ensuring it is seated correctly.

12. Close the Printer Cover

    • Close the front cover securely.

13. Power On the Printer

    • Plug the printer back into the electrical outlet and turn it on. Allow it to initialize.

14. Test the Printer

    • Print a test page to verify that the printer is functioning properly and that the solenoid is operating as expected.

We hope this information helps with your product build. For more details, feel free to check out our blogs. You’ll also find troubleshooting steps for PC issues, described in simple and easy-to-follow instructions, allowing anyone to fix the problems themselves. We also release troubleshooting newsletters, which provide additional guidance for resolving issues. We’re glad to be helping people with real solutions to their challenges.

Shop Solenoid (Relay) For HP LaserJet P1007 P1008 MF3010 today and use your printer effortlessly.