Pressure Roller Normal Quality For HP LaserJet 1020 M1005

COMPATIBLE ITEM –

Replacement Steps of Pressure Roller Normal Quality For HP LaserJet 1020 M1005 Canon LBP2900 Printer

1. Power Off the Printer

   • Turn off the printer and unplug it from the electrical outlet for safety.

2. Open the Printer Cover

   • Open the front cover to access the toner cartridge and drum assembly.

3. Remove the Toner Cartridge

   • Carefully pull out the toner cartridge and drum unit. Place them on a clean, flat surface to avoid spills or damage.

4. Access the Fuser Unit

   • For HP printers, you may need to remove the back cover. For the Canon LBP2900, access may be simpler. Use a screwdriver to remove screws if necessary.

5. Disconnect the Fuser Unit

   • Carefully unplug any connectors attached to the fuser unit. Note where each connector goes for easy reassembly.

6. Remove the Fuser Assembly

   • Gently pull the fuser unit out of the printer. Be cautious of any hot surfaces, especially if the printer was recently in use.

7. Locate the Pressure Roller

   • Inside the fuser unit, locate the pressure roller. It may be secured with clips or screws.

8. Remove the Old Pressure Roller

   • Carefully unclip or unscrew the old pressure roller and gently pull it out of its housing.

9. Clean the Fuser Unit (Optional)

   • While you have access to the fuser unit, wipe it down with a soft cloth to remove any toner residue or dust.

10. Install the New Pressure Roller

    • Take the new pressure roller and insert it into the fuser unit, ensuring it fits securely and aligns properly.

11. Reconnect the Fuser Unit

    • Plug in any connectors that were disconnected earlier, ensuring they are secure. Replace the fuser unit back into the printer.

12. Reinstall the Toner Cartridge

    • Carefully insert the toner cartridge and drum unit back into the printer, ensuring they are seated correctly.

13. Close the Printer Cover

    • Close the front cover securely.

14. Power On the Printer

    • Plug the printer back into the electrical outlet and turn it on. Allow it to initialize.

15. Test the Printer

    • Print a test page to verify that the installation was successful and that print quality meets expectations.