Paper Pickup Roller For HP LaserJet 1010 1020 M1005

Replacing the Paper Pickup Roller for HP LaserJet 1010 1020 M1005 (RL1-0266 RC1-2050) needs careful disassembling and attention to information. Here’s a manual to assist you change the paper pickup roller, which is found by part numbers like 1767062, 1759844, 1749765, 1724121, and 1803397.

We will need:

Phillips screwdriver. Plastic pry tool or flat-head screwdriver, Lint-free cloth (for cleaning), Isopropyl alcohol (for cleaning the rollers), Anti-static wrist strap (optional but recommended), New paper pickup roller (compatible replacement)

Turn Off and Remove:

Switch off the printer and disconnect it from the power source.

Take off all paper and open any trays to make the printer easier to handle

Find the Paper Pickup Roller:

The paper pickup roller is found near the back of the printer, close to the paper feed path.

You need to disconnect the rear cover or other components to enter the roller.

Disconnect the Roller:

Mindfully remove the old roller.

Place the New Roller:

Line up the new roller with the designated slot or mount inside the printer.

If there are clips, snap the new roller into place, making sure it is secure. If screws were involved, take the screwdriver to secure them.

Scrubbed the Area:

Before putting together the printer, take a lint-free cloth and isopropyl alcohol to clean the area around the roller and other parts of the paper path. This may assist in stopping future paper jams.

Pup together the Printer: Put the rear cover back in place.

Shut the scanner unit and any other compartments you open during the work.

Check the Printer: Connect the printer back in and turn it on.

Put paper and test printing a test page to make sure the new pickup roller is functioning properly.

If installed rightly, the new pickup roller will smoothly grab and feed paper without making jams.

Additional Tips related Paper Pickup Roller For HP LaserJet 1010 1020 M1005 (RL1-0266 RC1-2050)

• Installation: Ensure that the foam is easy to install or comes with clear instructions. Some suppliers may offer video tutorials.
• Maintenance: Regularly check the condition of the foam and other printer components to maintain optimal printing performance. Clean any dust or debris that may affect the roller’s function.

We hope this information helps with your product build. For more details, feel free to check out our blogs. You’ll also find troubleshooting steps for PC issues, described in simple and easy-to-follow instructions, allowing anyone to fix the problems themselves. We also release troubleshooting newsletters, which provide additional guidance for resolving issues. We’re glad to be helping people with real solutions to their challenges.

Shop Paper Pickup Roller For HP LaserJet 1010 1020 M1005 (RL1-0266 RC1-2050) today and use your printer effortlessly.