East Printers

Menu
Image of Fuser Guide (Pinch) Roller Without Spring Set For HP LaserJet 1020 Printer front view

Fuser Guide (Pinch) Roller Without Spring Set

₹362.00

+ Free Shipping
Tags:
class=”yoast-text-mark”>class=”theme-tag-sku”>

    class=”theme-tag-list-container”>

  • spring
 Pinch Roller With Spring Set For HP LaserJet 1020 Printer

Availability: 414 in stock

SKU: EPFP077S Categories: ,

Changing the Fuser Guide (Pinch) Roller Without Spring Set For HP LaserJet 1020 Printer includes a few steps and mindful handling. Here’s a step-by-step manual to assist you change it:

Switch off the Printer:

Remove the printer from the power source to ensure safety.

Tak off the Top Cover:

Take a Phillips screwdriver to disconnect the screws from the top cover of the printer.

After removing the screws, gently lift the cover to access the internal parts.

Take out the Back Cover:

Detach the back cover of the printer by taking off the screws at the rear.

After removing the screws, gently lift off the cover.

Enter the Fuser Assembly:

The fuser assembly is located at the back of the printer, close to the exit area.

Open any screws keeping the fuser in place and carefully remove any cables fixed to the fuser.

Take off the Fuser Assembly:

With care pull the fuser unit out of the printer. Be careful as the fuser can be delicate and may still be hot.

Open the Fuser Guide (Pinch) Roller Without Spring Set:

After pulling out the fuser, locate the Fuser Cover Guide.

Take the screwdriver to disconnect any screws securing the lower roller bushings.

Take off the bushings by softly pulling them out with tweezers or needle-nose pliers.

They are typically located on both sides of the lower roller.

Change the Fuser Guide (Pinch) Roller:

Place the new Fuser Assembly by putting them in the same place as the old ones. Make sure they are fitted rightly.

Secure them with the screws you removed earlier.

Put together the Fuser Guide (Pinch) Roller Without Spring Set:

After changing the Fuser Guide (Pinch) Roller, reassemble the fuser by placing back the parts you pulled off.

Reconnect any removed cables and screws.

Place the Fuser Guide (Pinch) Roller Without Spring Set:

Insert the fuser assembly back into the printer, ensuring it is positioned correctly.

Reattach it in place and reconnect any cables that were removed earlier.

Attach the Covers:

Connect the back and top covers of the printer, fixing them with screws.

Check the Printer:

Connect the printer back in, switch it on, and check to make ensure it’s running ok. Take a test page to assure everything is working.

We hope this information helps with your product build. For more details, feel free to check out our blogs. You’ll also find troubleshooting steps for PC issues, described in simple and easy-to-follow instructions, allowing anyone to fix the problems themselves. We also release troubleshooting newsletters, which provide additional guidance for resolving issues. We’re glad to be helping people with real solutions to their challenges.

Shop today and use your printer effortlessly.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Shopping Cart