Connector Power Spring For HP LaserJet M136 M108 M138 Printer

Replacement Steps of Connector Power Spring For HP LaserJet M136 M108 M138 Printer

1. Power Off the Printer

   • Turn off the printer and unplug it from the electrical outlet for safety.

2. Open the Printer Cover

   • Open the front cover of the printer to access the toner cartridge and internal components.

3. Remove the Toner Cartridge

   • Carefully pull out the toner cartridge and set it aside on a clean, flat surface to avoid spills or damage.

4. Remove the Printer Panels

   • Depending on the model, you may need to remove the side or back panels to access the internal components. Use a screwdriver to remove any screws.

5. Locate the Power Connector

   • Identify the connector power spring you need to replace or inspect. This is usually located near the power supply area.

6. Disconnect the Old Power Connector

   • Carefully unplug any connectors connected to the power spring. Take note of where each connector attaches for reassembly.

7. Remove the Old Power Spring

   • If the power spring is secured by screws or clips, carefully unclip or unscrew it and remove it from its housing.

8. Install the New Power Spring

   • Take the new connector power spring and position it in the same place as the old one. Secure it with screws or clips as necessary.

9. Reconnect the Power Connectors

   • Plug in any connectors that were disconnected earlier, ensuring they are secure and properly aligned.

10. Reattach the Printer Panels

    • Replace any side or back panels you removed earlier and secure them with screws.

11. Reinstall the Toner Cartridge

    • Carefully insert the toner cartridge back into the printer, ensuring it is seated correctly.

12. Close the Printer Cover

    • Close the front cover securely.

13. Power On the Printer

    • Plug the printer back into the electrical outlet and turn it on. Allow it to initialize.

14. Test the Printer

    • Print a test page to verify that the printer is functioning properly.

We hope this information helps with your product build. For more details, feel free to check out our blogs. You’ll also find troubleshooting steps for PC issues, described in simple and easy-to-follow instructions, allowing anyone to fix the problems themselves. We also release troubleshooting newsletters, which provide additional guidance for resolving issues. We’re glad to be helping people with real solutions to their challenges.

Shop today and use your printer effortlessly.