CCD Scanner Gear Kit (Old Model) For HP LaserJet M1005 Printer

Chancing the CCD Scanner Gear Kit (New Model) For HP LaserJet M1005 Printer is a quite technical job. The 29T fuser drive gear is accountable for moving rotational force from the motor to the fuser unit, allowing the fuser rollers to work correctly.

Switch off and remove the printer from the power source.

Let the printer to cool down, mainly the fuser unit, as it can get too hot.

Work in a static-free environment to secure electronic parts.

Take Toner Cartridge and Paper Tray:

Take out front cover and take off the toner cartridge to avoid any toner spills during the disassembly.

And Take off the paper tray to allow you more room to work.

Take out  Back and Side Covers:

Move the printer around and pinout the screws securing the back cover and side covers.

Using a Philips screwdriver, take off the screws and softly pry off the back and side covers using a flathead screwdriver or a plastic pry tool. Be heedful not to ruin the clips or tabs holding the covers in place.

Find the Fuser Drive Gear Assembly:

With the covers taken off, you will now have entry to the internal parts.

The CCD Scanner Gear Kit (New Model) is part of the gear assembly situated on the side near the fuser unit. It’s normally mounted next to other gears that drive the fuser roller.

Take off the Fuser Unit (If needs be):

In some models, it might be easier to take off the fuser assembly to enter the gear more easily.

If necessary, remove the power connectors and screws holding the fuser in place, and carefully slide it out of the printer.

Disconnect the CCD Scanner Gear Kit (New Model):

Inspect the it for signs of wear or damage.

Inspect the CCD Scanner Gear Kit (New Model) gear for signs of wear or damage.

Take out the screws or clips securing the gear to the frame.

Softly slide the old gear off its shaft. Use a flathead screwdriver to carefully pry off the stuck item.

Place the CCD Scanner Gear Kit (New Model):

Line up the new CCD Scanner Gear Kit (New Model) with the shaft, making certain it meshes properly with the adjacent gears.

Softly move the new gear onto the shaft. It should fit securely.

Secure the new gear by changing any screws or clips that were holding the old gear in place.

Examine the Gear Alignment:

After installing the new gear, manually rotate the gear assembly to check alignment and smooth movement. There should be no struggle.

Make certain that the new gear is making proper contact with the fuser assembly and motor gears.

Put together the Printer:

If you removed the fuser unit earlier, put it back in the printer and make sure all connectors are plugged in and all screws are securely fastened.

Reconnect the side and back covers of the printer, making certain that all clips and screws are correctly fixed.

Replace the Toner Cartridge and Paper Tray:

Place back the toner cartridge and paper tray back into the printer.

Check the Printer:

Put the printer back into the power source and switch it on.

Take a test print to confirm that the new gear is working correctly and that there are no strange sounds, paper jams, or print quality problems.

We hope this information helps with your product build. For more details, feel free to check out our blogs. You’ll also find troubleshooting steps for PC issues, described in simple and easy-to-follow instructions, allowing anyone to fix the problems themselves. We also release troubleshooting newsletters, which provide additional guidance for resolving issues. We’re glad to be helping people with real solutions to their challenges.

Shop CCD Scanner Gear Kit (Old Model) For HP LaserJet M1005 Printer today and use your printer effortlessly.