17 Pin 1MM Pitch CCD Cable For HP Scanjet 3500 4500 Printer

The 17 Pin 1MM Pitch CCD Cable for HP ScanJet 3500 and 4500 Printers is a critical component that connects the CCD sensor to the printer’s mainboard, facilitating effective scanning. Here’s an overview and installation steps:

Key Features of 17 Pin 1MM Pitch CCD Cable For HP Scanjet 3500 4500 Printer:

• Connector Type: 17-pin connector with a 1mm pitch, specifically designed for HP ScanJet 3500 and 4500 models.
• Durable Construction: Made from high-quality materials to ensure reliable performance and signal transmission.
• Compatibility: Ensures proper functionality for the CCD sensor in the specified printer models.

Installation Steps:

1. Power Off the Printer:
   • Unplug the printer from the power source to ensure safety during the installation.
2. Open the Printer Cover:
   • Carefully lift the scanner lid to access the internal components where the CCD cable connects.
3. Locate the Existing CCD Cable:
   • Identify the old 17-pin CCD cable connected to the mainboard.
4. Remove the Old Cable:
   • Gently disconnect the old cable by unplugging it from the connector on the mainboard.
5. Install the New CCD Cable:
   • Take the new 17 Pin CCD cable and align it with the connector.
   • Push it in firmly until it fits securely into place.
6. Reassemble the Printer:
   • Close the printer cover carefully, ensuring it is properly seated.
7. Reconnect the Power:
   • Plug the printer back into the power source.
8. Test the Printer:
   • Turn on the printer and perform a test scan to confirm that the new cable is functioning properly.

Compatible Model to 17 Pin 1MM Pitch CCD Cable For HP Scanjet 3500 4500 Printer:-

3500,
4500,

1522,