Paper Feed Sensor for HP DJ 5810

Paper Feed Sensor for HP DJ 5810

• SKU                                            EPPA097P
• Category                                     Printer Accessories
• HSN Code                                   8443
• Unit                                             Nos.
• Weight                                        0.085 kg
• Brand                                          HP
• Parts Type                                  compatible
• Model                                         DJ 5810
• Tax Preference                           Taxable

Replacement Steps of Paper Feed Sensor for HP DJ 5810 :-

1. Power Off the Printer

   • Turn off the printer and unplug it from the electrical outlet for safety.

2. Open the Printer Cover

   • Open the front cover to access the printer’s interior and paper tray.

3. Remove the Ink Cartridges

   • Carefully remove the ink cartridges to prevent damage during the replacement process. Place them on a clean surface.

4. Remove the Paper Tray

   • Take out the paper tray from the printer to give you more access to the internal components.

5. Access the Printer Internals

   • You may need to remove the back or side panels of the printer to access the paper feed sensor. Use a screwdriver to remove any screws as necessary.

6. Locate the Paper Feed Sensor

   • Identify the paper feed sensor, which is typically located near the paper feed assembly.

7. Disconnect the Wiring

   • Carefully unplug any connectors attached to the sensor. Make a note of where each connector goes for reassembly.

8. Remove the Old Sensor

   • If the sensor is secured with screws or clips, carefully unscrew or unclip it and remove it from its housing.

9. Install the New Sensor

   • Take the new paper feed sensor and position it in the same location as the old one. Secure it with screws or clips as necessary.

10. Reconnect the Wiring

    • Plug in any connectors that were disconnected earlier, ensuring they are secure.

11. Reassemble the Printer

    • Replace any panels that were removed and secure them with screws.

12. Reinstall the Ink Cartridges

    • Carefully insert the ink cartridges back into the printer, ensuring they are seated correctly.

13. Close the Printer Cover

    • Close the front cover securely.

14. Power On the Printer

    • Plug the printer back into the electrical outlet and turn it on. Allow it to initialize.

15. Test the Printer

    • Print a test page to verify that the printer is functioning properly and that the new sensor is operating as expected.

We hope this information helps with your product build. For more details, feel free to check out our blogs. You’ll also find troubleshooting steps for PC issues, described in simple and easy-to-follow instructions, allowing anyone to fix the problems themselves. We also release troubleshooting newsletters, which provide additional guidance for resolving issues. We’re glad to be helping people with real solutions to their challenges.

Shop Paper Feed Sensor for HP DJ 5810 today and use your printer effortlessly.